WORLDWIDE SHIPPING
| Data Sheet | |
| Bearing no | 1201 TVH |
| Sealed | no |
| Inner diameter ( d ) | 12 mm |
| Outer diameter ( D ) | 32 mm |
| Width ( B ) | 10 mm |
| Tracks | Temptered steel |
| Bearing cage | Glass polyamide |
| Clearance | CN |
| Load capacity | - |
| Dynamic load | 5,700 N ≈ 5,7 qq |
| Static load |
1,270 N ≈ 1,3 qq
|
| Fatigue limit |
|
| Speed | |
| Speed limit | 28,000 rpm |
| Reference speed | 21,300 rpm |
| Temp. | |
| Min temp | -30 °C |
| Max temp | 120 °C |
| Dynamic axial factor | 2,61 |
| Axial static load | 1,76 |
About:
Self-aligning ball bearings is designed for support partial, or total misalignment than usually happen when the motor or the piece when its used, vibrates. This type of bearings are build with different cage materails. Steel for a harder support, bronce for a better ajust, or polyamide for a better temperature resistance.
Applications:
- Wheel
- Unaligned machines
- Industrial machines
- Robotics
Lubricaction:
For a better usage, use contamining free grase, as #2 or #3. but also can be used alimentary grade grease.
Assembly:
Before proceed with the assembly, make sure than the surface when the bearing is clean and injury free, also same with the axis. If this one is damaged, please consider to replace, or fix it. Once all previous conditions are done, proceed to set the bearing. Better use a hydraulic press to place it. Once its set, proceed to apply the grease.
Note: for this bearing, grease measure used to be 1,6g.
Product title
Vendor
Q19.99 | Q24.99
Product title
Vendor
Q19.99 | Q24.99
Product title
Vendor
Q19.99 | Q24.99
Product title
Vendor